Minnie the Moocher is a modified David Stimson Ocean Pointer
Ocean Pointer Specs:
LOA: 19'6"
Beam: 6'9"
Draft: 20"
Weight: Approx. 2,200 lbs.
Construction:
Strip planked cedar on plywood semi-bulkheads, mahogany backbone, mahogany stringers
West System epoxy glue
Fastenings: Silicon Bronze
Deck: Vectra fabric and epoxy over BS 1088 Marine Occume plywood
Cockpit: Self-bailing, Vectra & epoxy over BS 1088 Marine Occume plywood
Flotation: 900 lbs., Styrofoam
Trim: Mahogany, varnished
Rub Rail: Jatoba, oiled
Finish: Topsides - Endura tinted to Kirby Green Gray
Deck and Cockpit - Endura tinted to AWLGRIP Moon Dust
Cockpit Anti-Slip - Endura tinted to AWLGRIP Castle Tan
Propulsion:
Kubota V1505E 4 cylinder diesel - 33.5 HP @ 3,000 RPM
Diecon marine conversion
Hayes Aluminum bellhousing and gear adaptor
ZF 25A Marine Gear 1.548:1 with trolling valve
Buck Algonquin MS59 125 strut and 10R3XBR1.2 rudder
Aquamet 22 1" shaft with bronze coupling and ZF 14" × 11" 3-blade prop
Norscot shaft seal
Controls
Steering: Kobelt 7031 hydraulic helm and 7040B cylinder, bronze spoke wheel
Engine Controls: Kobelt 2042HL
Control Cables: Felsted
Trolling Valve Interlock: Panish Marine Systems
Electronics
VHF: Icom IC-M504 VHF with Digital Antenna
VHF: Standard Horizon HX851 VHF
AIS: Digital Yacht AIT1000 Transponder with Digital Antenna
Chartplotter: Garmin 3005C
Depth Sounder: Garmin GSD22